C86 silt pusher

C86

The Conver C86 push boat was developed especially for cleaning up ponds and watercourses. The machine is particularly useful in situations where you cannot or may not work from the edges. The push boat can also be used to restore the bottom profile during the removal of silt.

The push boat is especially suitable for soft bottoms. It really comes into its own along relatively long, straight waterways. The C86 can currently be delivered as standard with push blades with a maximum working depth of up to 2.00 m and a working width up to more than 8.00 m. Vertical precision of up to 10 cm is possible with the push boat. The push boat has little trouble with large debris and obstacles. Large debris is usually pushed along with the rest. A hydraulic stop on the winch power prevents overloading.

Efficiency, durability and ease of use were the focal points in the development of the Conver C86. Naturally a number of tools are available for this machine, increasing the variety of jobs it can do.

Conver silt pusher C86
SPECIFICATIONS CONVER C86
DIMENSIONS (L X W X H)8,00 x 1,76 x 1,42 m
HULL (L X W X H)4,75 x 1,70 x 0,80 m
MATERIAL3 mm Raex S400
WEIGHT3300 kg (excluding implements)
DRAFTca. 0.45 m
COLOUROrange RAL2004 / Grey RAL7012
ENGINEWater-cooled 4 cylinder, 36 kW at 3000 rpm
EMISSION CLASSComplies with local requirements
FUEL TANK5 – 6 L/hr
COOLING SYSTEMRadiator
ELECTRIC SYSTEM12 V
PROPULSIONTwo hydraulic winches with auto-spooling system
– Forward winch 5.000 kg, 12mm 6x36stk 240m, 12 m/min
– Reverse winch 2.500 kg, 10mm 6x36stk 260m, 24 m/min
STEERINGHeight adjustable rear arm with a steering angle of 2x 50°
HYDRAULIC SYSTEMOne load-sensing pump and one gear pump with (semi-)proportional valves
FUEL TANK75L
HYDRAULIC TANK90 L with suction and return filter
HYDRAULIC OILUnivis N46
CREW1 operator