C550 amphibious machine

C550

The Conver C550 is a robust multi-functional amphibious tool carrier for maintenance on land and water. This amphibious machine is super flexible and suitable for all kinds of mowing, dredging, retaining wall work and much more.

The operator’s space is mounted on the rotating mast set so that the operator turns with the tool, similar to an excavator, and thus always retains visibility of the work. The operator’s area is hinged so it can be lifted out of the hull. This provides ease of access to components below deck for service purposes.

The machine can drive itself out of the water on to embankments of up to 30°.

The Conver C550 is a robust multi-functional amphibious tool carrier for maintenance on land and water
SPECIFICATIONS CONVER C550H
HULL (L x W x H)4.0 x 2.2 x 1.5 m
WEIGHT4,550 kg 4.550 kg, excl. attachment
DRAFT1,1m at 4.550 kg
GROUND PRESSURE150 – 200 gr/cm2 at 4.550 kg
MAX. INCLINATION30° longitudinal, 20° transverse (max. continuous working angle 15°)
ENGINEWatercooled, diesel, 68 hp
EMISSION CLASSComplies with local requirments
TRACK DRIVE2x 450mm rubber tracks, positive drive
PROPULSION SYSTEMSingle 400mm tiltable and 0,4m height adjustable anti-coiling auger
PUMPSDouble LS-pump for tracks, auger and attachments, single gear wheel pump for the hydraulic cylinders
VALVESDanfoss PVG 32 proportional
FUEL TANKDiesel, 2 x 60 L
HYDRAULIC TANK195 L, suction- and return filtration, oil cooler in return line
ARMS1,8m + 1,2m, CW05 Q/R coupling
SLEWING ANGLEArm set and operator console over ca. 200 degrees
PROVISIONAL OIL FLOW110 l/min @ 200bar, proportional