C550 amphibious machine

C550

The Conver C550 is a robust multi-functional amphibious tool carrier for maintenance on land and water. This amphibious machine is super flexible and suitable for all kinds of mowing, dredging, retaining wall work and much more. The operator’s space is mounted on the rotating mast set so that the operator turns with the tool, similar to an excavator, and thus always retains visibility of the work. The operator’s area is hinged so it can be lifted out of the hull. This provides ease of access to components below deck for service purposes.

The machine can drive itself out of the water on to embankments of up to 30°.

The Conver C550 is a robust multi-functional amphibious tool carrier for maintenance on land and water
SPECIFICATIONS CONVER C550
DIMENSIONS (L x W x H)4,0 x 2,2 x 1,1 m
WEIGHT4.550 kg, excl. attachments
DRAFT1,1 m at 4.550 kg
COLOROrange RAL2004 / Grey RAL7012
BOTTOM PRESSURE 150 – 200 gr/cm 2 bij 4.550 kg
MAX. CLIMBING ANGLE30°, 20° sideways (max. operating angle 15° continuous)
ENGINEWater-cooled 68 pk diesel
EMISSION CLASSAccording to regional requirements
PROPULSION LAND2x 450mm rubber tracks, positive drive
PROPULSION WATERsingle 400mm tiltable and 0,4 m height adjustable anti-coiling auger
PUMPSdouble LS-pump for tracks, auger and attachments, single gearwheel pump for cylinders
VALVE BLOCKSDanfoss PVG 32 proportional with pressure compensation
FUEL TANKDiesel, 2 x 60 l tank
HYDRAULIEK195 l, suction- and return filtration, oil-cooler
BOOM1,8m + dipper 1,2m, CW05 quick coupling system
SLEWING RANGE approx. 200 degrees
OIL FLOW FOR ATTACHMENT 110 l/min at 200 bar, proportional