C580h amphibious machine

C580h

The Conver C580h was developed for maintaining ditches, channels and ponds, irrespective of the water depth. When it is floating, the boat is propelled by one or two hydraulic folding anti-coiling augers. On land or when there is not enough water to float in, the C580h can move using two 250 mm-wide rubber tracks. The machine can drive itself out of the water on to embankments of up to 30°.

The Conver C580h amphibious machine comes with an industrial 4-cylinder Hatz 65 hp diesel engine. The functions of the machine all work hydraulically. The 2-piece hydraulic mast mounted on the foredeck can be equipped with a series of tools. The standard mast is suitable for mowing and clearing activities. A heavier model of the mast is available for dredging work.

Conver,amphibious,amphibious machine,working on land and water,waterway maintenance
SPECIFICATIONS CONVER C580H
DIMENSIONS (L x W x H)4.2 x 1.85 x 1.5 m (excl. pontoons)
ARM SET1,50 m and 1,25 m
MATERIAL3 mm profiled St37
WEIGHT2,750 – 3,500 kg.
DRAFTApprox. 1,0 m.
COLOROrange RAL2004 / grey RAL7012
ENGINEDiesel, 65 hp
EMISSION CLASSComplies with local requirements
FUEL CONSUMPTION8- 10 L/hr
ELECTRICAL INSTALLATION12V
PROPULSIONSingle 400 mm hydraulic anti-coiling auger
STEERINGServo-assisted with 2×50° steering angle for the auger and two servo-foot pedals for the tracks
HYDRAULIC SYSTEM1x Load Sensing pump, (semi-)proportional valves
FUEL TANK100 L
HYDRAULIC TANK200 L with return- and suction filter and oil-cooler
HYDRAULIC OLIEUnivis N46
SPEED8/7 km/hr, land/water
CREW1 person