Conver C10

The Conver C10s is the largest of the series of self-propelled machines. The C10s is produced in series with two arm sets of 1.50+1.50 m. The mast can be extended in 0.25 m steps up to a maximum range of 4.50 m. The machine can even be equipped optionally with a third arm set for an extra attachment. The arms specific construction makes them extremely stable and wear-resistant with high torsion rigidity in the event of collisions or other instances where force is exerted unintentionally.

The support wheel of the C10s is mounted on a rigid double section arm with a standard length of 2.50+2.10 m that can be extended in steps up to 6.60 m. This means the machine can support itself on its own side, in the ditch bottom or even on the opposite side of the slope.

The design with two or three equipment arms makes the C10s particularly suitable for working as a mow-rake combination. In standard specification the C10s comes with a 4-cylinder Hatz air-cooled 65 hp engine, or optionally with a Deutz 4-cylinder air-cooled 100 hp engine. In both cases, the engine runs three hydraulic pumps for separate control of main wheels, support wheel and equipment and cylinders. This creates a stable system with efficient energy consumption.

The total power of the engine can be used for the driving wheels of the vehicle; control is dynamic and is programmed so the machine automatically adjusts to the differing circumstances of the ground.

The standard C10s comes with a comfortable cabin with various options such as air conditioning and radio/CD player.

The C10s is suitable for working with various types of equipment, such as a double action cutterbar in working widths of 1.50 to 2.60 m, which can also be supplied with a bent end part, or a rake in working widths of 2.00 to 3.20 m for clearing the slope. Furthermore a hedge trimmer can be fitted or even a small flail mower